5-DOF Robotic Arm Kit – DIY STEM Robot Arm with Servo Motors for Students & Hobbyists - (041)
₹2,560.20 Original price was: ₹2,560.20.₹2,230.20Current price is: ₹2,230.20. + GST
TDA2050 Audio Amplifier IC
₹30.00 Original price was: ₹30.00.₹26.00Current price is: ₹26.00. + GST
LM78L05-5V 100mA Positive Regulator
Rated 5.00 out of 5 based on 7 customer ratings
(7 customer reviews)
₹4.00 Original price was: ₹4.00.₹3.90Current price is: ₹3.90. + GST
Features
- Versatile, High-Accuracy, Fixed Voltage Regulators
- Suitable for Currents up to 100mA
- Internal Thermal Overload Protection
- Internal Short-Circuit Current Limit
- Output Voltage Tolerance ±4%
65 in stock
SKU:
B-1
Categories: Electronic, Transistors
Description
LM78L05-5v 100mA Positive Voltage Regulator
General Description
The LM78L05 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown, and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 100mA output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to being used as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents.
Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply
Reviews (7)
7 reviews for LM78L05-5V 100mA Positive Regulator
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC547 NPN General Purpose Transistor
Rated 4.00 out of 5
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
3.7V 1200 mAh 18650 Lithium Rechargeable Battery
Rated 4.58 out of 5
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications. Perfect for use in various electronics projects in India, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery ensures reliability and performance. Ideal for various electronics projects, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery offers quality and performance.
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
Rated 5.00 out of 5
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
Rated 4.48 out of 5
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
BC327 PNP General Purpose Amplifier Transistor
Rated 4.00 out of 5
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
BC548 NPN 30V 0. 1A Transistor High quality
Rated 4.00 out of 5
BC548 is another general purpose widely used transistor that can be easily get from reputable electronic components store, this transistor also have bunch of good features on the basis of which one can use it in their electronic circuit, it can handle maximum current of 500mA which is enough to drive many other components such as ICS, other transistors, portion of a circuits, relays, LEDs etc. The max collector dissipation of the device is 625 miliWatt which is another good feature to use it as a small amplifier.
DHT11 Temperature and Humidity sensor
Rated 4.67 out of 5
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
Original Flex sensor 2.2 inches for Motion and Diy
Rated 4.48 out of 5
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055. Perfect for use in various electronics projects in India, Original Flex sensor 2.2 inches for Motion and Diy ensures reliability and performance. Ideal for various electronics projects, Original Flex sensor 2.2 inches for Motion and Diy offers quality and performance.


















Sneha (verified owner) –
Good Kit
Viral (verified owner) –
I got my project done with these components Great Support
Vikas (verified owner) –
Online best cost electronic components
Vikas (verified owner) –
I got my project done with these components Great Support
Jayen (verified owner) –
Less cost than other websites
Shubham (verified owner) –
Good quality.
Devendra (verified owner) –
I got my project done with these components Great Support