YT-38 32.768Khz Cylindrical Crystal Oscillator
₹8.00 + GST
9 in stock
Purchase & earn 8 SmartX Rewards Coin!This is a YT-38 32.768Khz Cylindrical Crystal Oscillator. The crystal oscillator is used in microprocessor clock, network card, various consumer electronics, etc.
?
Package Includes:
1 x?YT-38 32.768Khz Cylindrical Crystal Oscillator.
Specifications :-
Frequency Range | 32.768Khz |
Tolerance(%) | 20 |
Operating Temperature Range | -10C to +60C |
Storage condition (Deg C) | -20 to 70 |
Length (mm) | 8 |
Width (mm) | 2.8 (Body Diameter) |
You must be logged in to post a review.
Related products
- Rated 5.00 out of 5
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
₹5.00Original price was: ₹5.00.₹0.98Current price is: ₹0.98. + GSTPurchase & earn 1 SmartX Rewards Coins!Add to cartBuy nowBC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
- Rated 4.00 out of 5
Crystal Oscillator 8 MHZ
₹15.00Original price was: ₹15.00.₹6.72Current price is: ₹6.72. + GSTPurchase & earn 7 SmartX Rewards Coin!Add to cartBuy nowThis is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC’s which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
- Rated 4.00 out of 5
100 MM x 2.5 MM, Nylon Zip Wire Organizer/Self Locking
₹10.00Original price was: ₹10.00.₹1.64Current price is: ₹1.64. + GSTPurchase & earn 2 SmartX Rewards Coin!Add to cartBuy nowThis is a?100 x 2.5 mm Nylon cable tie?also known as hose tie or Zip tie. The?cable tie?is perfect for holding items together specially electric cables or wires.? The flexible design of the?cable tie?makes it easier to slip the ties under and around wire harness. Thanks to the teeth on one of the side of the belt makes it easier for self locking and securing the wires.
- Rated 4.00 out of 5
BC547 NPN General Purpose Transistor
₹5.00Original price was: ₹5.00.₹0.98Current price is: ₹0.98. + GSTPurchase & earn 1 SmartX Rewards Coins!Add to cartBuy nowBC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
- Rated 4.50 out of 5
Voltage Sensor Module 25VDC
₹16.00Original price was: ₹16.00.₹15.08Current price is: ₹15.08. + GSTPurchase & earn 15 SmartX Rewards Coin!Add to cartBuy nowThis DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input.? If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input.
Reviews
There are no reviews yet.