MOV 14D471 Metal Oxide Varistor
₹5.37
Specifications of MOV 14D471
- Maximum Allowable Voltage (ACrms): 300 Volts
- Maximum Allowable Voltage (DC): 385 Volts
- Varistor Voltage (@1ma): 470 Vdc
- Maximum Energy (J): 125
- Maximum Peak Current (8/20us): 4500A
- Rated Power: 0.6 watt
Sold out!
- MOV 14D471 is a 14 mm radial leaded varistor devices protects against over voltage transients such as lightning, power contact and power induction. The metal oxide varistors offer a choice of varistor voltages from 18 V to 1800 V and Vrms voltages from 11 V to 1100 V.
- Metal oxide varistors, also known as MOVs are one of the most common types of varistors. They are voltage dependent, nonlinear devices that provide transient suppression.
- A Metal Oxide Varistor (MOV) is used in power supply circuits as a protection component. MOV are similar to resistors and has only two leads, there is no polarity and can be connected in both directions. MOV is basically used to protectMOV 14D471 is a 14 mm radial leaded varistor devices protects against over voltage transients such as lightning, power contact and power induction. The metal oxide varistors offer a choice of varistor voltages from the circuit from high voltage spikes.
- MOV have a high current handling, high energy absorption capability and fast response times to protect against transient faults up to rated limits.
Related products
Add to cartBC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
Add to cartCrystal Oscillators are used as a quick and easy way to offer circuits a very accurate and consistent frequency output. This 16 MHz Crystal is a thru-hole type and is typically used with microcontrollers.
Add to cartBC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
- Add to cart
1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability.
- Add to cart
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side.
Reviews
There are no reviews yet.