MJE13005A NPN Power Transistor
₹8.40
SPECIFICATIONS
| Collector-Emitter Voltage | 400V |
| Collector- Base Voltage | 700V |
| Emitter- Base Voltage | 9V |
| DC Current gain | 60 |
| Package | TO-220 |
| Collector Current | 4A |
| Base Current | 2A |
| Total power dissipation | 75W |
| Operating Temperature | -65 to 150 degrees C |
13 in stock
13 in stock
- The MJE13005A is a high-speed NPN transistor with a high voltage. With a collector-emitter voltage of 400V and a continuous collector current of 4A. The Transistor has a very low fall time making it suitable for switching AC voltage (115V/220V) for converter and inverter applications.
- The MJE13005A is a high-voltage NPN transistor with a collector-emitter voltage of 400V and a collector current of 4A, as well as a fast switching speed of 0.9uS, making it an excellent choice for high-voltage, high-speed switching circuits in converter and inverter applications.Â
You must be logged in to post a review.
Related products
- Add to cart
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side.
- Add to cart
1-Channel Solid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF.
- Add to cart
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
Crystal Oscillator 8 MHZ
₹8.20Add to cartThis is a 8MHZ Crystal. This is a low cost crystal oscillator with oscillation frequency of 8Mhz. Crystal are normally required to provide clock pulses to your micro controller or other IC’s which require external clock source.
An oscillator crystal has two electrically conductive plates, with a slice or tuning fork of quartz crystal sandwiched between them. The crystal oscillator circuit sustains oscillation by taking a voltage signal from the quartz resonator, amplifying it, and feeding it back to the resonator. Quartz has the further advantage that its elastic constants and its size change in such a way that the frequency dependence on temperature can be very low.
- Add to cartCore processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna.
Reviews
There are no reviews yet.