Welcome to Smartxprokits| Get Flat 5% Use code- *FLAT5* and Free delivery on orders above Rs 900.

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
Sale!

LM3915 LED Dot/Bar Display Driver IC DIP-18 Package

35.28

Specification:-

ParameterValue
Power Dissipation (3) PDIP (NFK) 1365 mW1365 mW
Supply Voltage25V
Voltage on Output Drivers25V
Input Signal Overvoltage+-35V
Divider Voltage-100mV to V+
Reference Load Current10 mA
Storage Temperature Range-55°C to 150°C
Lead Temperature (Soldering, 10 sec.)260°C

 

20 in stock

  • The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDS, LCDs or vacuum fluorescent displays, providing a logarithmic 3 dB/step analog display. One pin changes the display from a bar graph to a moving dot display. LED current drive is regulated and programmable, eliminating the need for current limiting resistors. The whole display system can operate from a single supply as low as 3V or as high as 25V. The IC contains an adjustable voltage reference and an accurate ten-step voltage divider. The high- impedance input buffer accepts signals down to ground and up to within 1.5V of the positive supply. Further, it needs no protection against inputs of ±35V. The input buffer drives 10 individual comparators referenced to the precision divider. Accuracy is typically better than 1 dB. The LM3915’s 3 dB/step display is suited for signals with wide dynamic range, such as audio level, power, light intensity or vibration. Audio applications include average or peak level indicators, power meters and RF signal strength meters. Replacing conventional meters with an LED bar graph results in a faster responding, more rugged display with high visibility that retains the ease of interpretation of an analog display. The LM3915 is extremely easy to apply. A 1.2V full- scale meter requires only one resistor in addition to the ten LEDs. One more resistor programs the full- scale anywhere from 1.2V to 12V independent of supply voltage. LED brightness is easily controlled with a single pot

Reviews

There are no reviews yet.

Be the first to review “LM3915 LED Dot/Bar Display Driver IC DIP-18 Package”

Your email address will not be published.

Categories: ,
Sale!

Cart

Your Cart is Empty

Back To Shop
Open chat