Sale!
Sale!47 uF 50V Through Hole Electrolytic Capacitor
₹1.00
Specification
| Capacitance | 47uF |
| Mounting Type | Through Hole |
| Voltage(V) | 50 |
| Operating Temperature (°C) | -40 to 105 |
| Length (mm) | 6.3 |
| Width (mm) | 6.3 (body diameter) |
| Height (mm) | 35 |
| Weight (gm) | 1 (approx) (each) |
| Shipment Weight | 0.018 kg |
| Shipment Dimensions | 10 × 7.5 × 1 cm |
53 in stock
This item: 47 uF 50V Through Hole Electrolytic Capacitor
53 in stock
₹1.00
₹1.00
₹59.00
- It is a 47 uF 50V Through Hole Electrolytic Capacitor. The capacitor contains an insulator between relative conductors in an electrode
1 review for 47 uF 50V Through Hole Electrolytic Capacitor
Related products
- Add to cartCore processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna.
- Add to cart
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side.
- Add to cart
This is a 100 x 2.5 mm Nylon cable tie also known as hose tie or Zip tie. The cable tie is perfect for holding items together specially electric cables or wires. The flexible design of the cable tie makes it easier to slip the ties under and around wire harness. Thanks to the teeth on one of the side of the belt makes it easier for self locking and securing the wires.
Add to cartSpecification
- Size : 75mm (length) x 55mm (W) x 19.3mm (height);
- Weight : 80g;
- PCB Color : Blue;
- board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed;
- Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal;
- optocoupler isolation, good anti-jamming;
- Low pull, high release. Energisation status indicator light, release status LED is off;
- VCC for the system power, JD_VCC for the relay power. Default hair 12V relay, plug the jumper cap to;
- Relay Maximum output : DC 30V/10A, AC 250V/10A
- Wiring : VCC : positive power supply system GND : System power supply negative IN1 – IN4 : relay control ports
16 x 2 (JHD162A) Blue/White color DC 5V Character LCD display module FOR ALL TYPE OF DEVLOMENT BOARD
₹118.00Add to cart- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Blue Backlight
Harsh (verified owner) –
Best cost electronic components in India