Sale!
Sale!400KV Step Up Power Module
₹214.76
Specifications:
| Input Voltage (V) | 3.3 ~ 5 VDC |
| Maximum Operating Current (A) | 2 5 |
| Max. Output Voltage | 400 KV |
| Max. Output Current (A) | 0.5 A |
| Discharge Time | 10s |
| Color | Black |
| Length (mm) | 65 |
| Width (mm) | 23 |
| Height (mm) | 23 |
| Weight (gm) | 40 |
This item: 400KV Step Up Power Module
₹214.76
₹214.76
1 × 12 Volt 2A Power Adapter Supply AC to DC 2.1mm X 5.5mm Plug 12 V 2 Amp Power Supply Wall Plug (Black)
45 in stock
₹110.00
₹9.00
₹121.44
- This is a high voltage step-up power supply module, which is commonly used in electronics experiments and demonstrations. The module can generate a voltage of up-to 400KV from an input of 3-6V from a normal Li-ion battery. The high-voltage module uses the principle of the Tesla coil.
Features:
- High-Quality Silicone Wires at Input and Output
- Creates an Arc of 400KV
- Small in Size
- Easy to Use
Related products
- Add to cart
BC548 is another general purpose widely used transistor that can be easily get from reputable electronic components store, this transistor also have bunch of good features on the basis of which one can use it in their electronic circuit, it can handle maximum current of 500mA which is enough to drive many other components such as ICS, other transistors, portion of a circuits, relays, LEDs etc. The max collector dissipation of the device is 625 miliWatt which is another good feature to use it as a small amplifier.
- Add to cartCrystal Oscillators are used as a quick and easy way to offer circuits a very accurate and consistent frequency output. This 16 MHz Crystal is a thru-hole type and is typically used with microcontrollers.
- Add to cart
1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability.
- Add to cart
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD – VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
- Add to cart
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
Reviews
There are no reviews yet.