28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s
₹10.00 ₹4.10 + GST
28 Pin Narrow IC Socket base adaptor is a 28 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. The IC base is for a narrow IC.
69 in stock
Purchase & earn 4 SmartX Rewards Coin!- 28 pins.
- JDEC compliant.
- Molded notch for proper orientation.
- Easy to insert and remove ICs.
- Ideal for narrow ICs.
12 reviews for 28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s
You must be logged in to post a review.
Related products
- Purchase & earn 277 SmartX Rewards Coin!Add to cartBuy now
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. ?Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055.
- Purchase & earn 1 SmartX Rewards Coins!Add to cartBuy now
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality)
₹139.00₹136.50 + GSTPurchase & earn 137 SmartX Rewards Coin!Add to cartBuy nowSpecification
- Size : 75mm (length) x 55mm (W) x 19.3mm (height);
- Weight : 80g;
- PCB Color : Blue;
- board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed;
- Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal;
- optocoupler isolation, good anti-jamming;
- Low pull, high release. Energisation status indicator light, release status LED is off;
- VCC for the system power, JD_VCC for the relay power. Default hair 12V relay, plug the jumper cap to;
- Relay Maximum output : DC 30V/10A, AC 250V/10A
- Wiring : VCC : positive power supply system GND : System power supply negative IN1 ? IN4 : relay control ports
- Purchase & earn 14 SmartX Rewards Coin!Add to cartBuy now
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
- Purchase & earn 1 SmartX Rewards Coins!Add to cartBuy now
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
Ayush (verified owner) –
Good techinical knowledge
Harsh (verified owner) –
Good service.
Vikas (verified owner) –
Online best cost electronic components
Zohar (verified owner) –
Very well worth the money.
Harsh (verified owner) –
Good quality.
Roma (verified owner) –
Good support and recommended
Priya (verified owner) –
Good quality.
Ayush (verified owner) –
Less cost than other websites
Rahul (verified owner) –
Very fast delivery.
Er.Prashant (verified owner) –
Good quality.
Akshay (verified owner) –
Good techinical knowledge
Vivek (verified owner) –
Good service.