Search Results for: battery
Showing 1–16 of 55 results
3 x 1.5V AAA Battery Holder Without Cover
₹30.00 + GSTAdd to cartBuy now- Battery type: AAA.
- Wire Length: 120 mm.
- Mounting holes diameter: 2.5mm.
- Metal spring: carbon steel nickel plating by NCAA salt spray test, stainless steel spring.
- Color: Black.
Lead Acid Battery 12VDC 3.3Ah
₹1,100.00 + GST11.1V 2600MAH Lithium-ION Rechargeable Battery
₹520.00 + GSTAdd to cartBuy nowSmall in size and weight compared to Ni-Cd, Ni-MH, and Lead Acid Batteries and Very High in Power. Long life with full capacity for up to 1000~1500 Approx charge cycles BMS Protection Maximum Capacity – 2600 ah 3 months Warranty against Manufacturing Defects Only.
1 x 18650 Battery Holder
₹8.00 + GSTAdd to cartBuy nowFeatures :
- There are slots on the edge of the holder to combine them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
- Add to cartBuy now
Rated Voltage -12/24v Rated Current- 30A Max. PV Voltage -50v Max PV Input Power -390w(12v)780w(24v)
Battery Holder for AA Battery 2 Cells
₹15.00 + GSTAdd to cartBuy nowThis is a Black Plastic Storage Box Case for 2 x AA Battery Cells, without Cover. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for devices that need a 3V external battery
DC 3-9V Double Side Mini Water Pump, Battery Holder, Switch, Starter Kit for DIY Electronic Projects
₹123.00 + GSTbattery snap connector
₹15.60 + GSTAdd to cartBuy nowFeatures :
- Excellent material
- Fine workmanship
- It is an environmental 9V battery buckle
- T- Fonts, with red and black connecting lines
- Save Power and Protect the environment
- Good electrical conductivity and comfortable sense of touch
- Add to cartBuy now
The 3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 20A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.(if the cooling environment is not good, please …
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6VRead More
- Add to cartBuy now
Model Name/Number 18650 2000mAh Use Power Saver Voltage 3.7V Battery Capacity 2000mAh Size 18*63 Battery Type Lithium-Ion Usage/Application Solar Light / General Purpose
TM619-4 -30 Amps Taiwanese Digital 18 Programs Countdown Programmable Replaceable Battery Timer 5 Pin – ABS -(White and Grey)
₹628.94 + GSTRead moreFeatures Taiwanese Excellence – Worlds most Proven DC Time Switch – TM619-4 – 5 pin ( Volt Free Contacts ) is the pinnacle choice in precision electronic programmable timer – Made with taiwanese pcb technology & manufacturing process this unit is undisputed since almost 4 decades .Widely used wordd wide Now Globe Terminal -Exclusively Ships …
- Add to cartBuy now
Specifications:
Charging accuracy (%) 1.5 Charging method Linear Full Charge Voltage (V) 4.2 Over-Current Protection (A) 3 Under-Voltage Protection (V) 2.5 Input Voltage (V) 4.5-5.5 Rated Power (W) 4.2 Operating Temperature (?C) -10 to 85 Length (mm) 25 Weight (gm) 20 Height (mm) 6 - Add to cartBuy nowSpecification:
- Micro USB input: 5 V 1A
- USB output: 5V 2.1A / 5V 1A (Dual USB interface)
- Charging screen: intelligent digital screen
- Type of batteries: liquid lithium ion batteries (18650)
- Product size: 57mm x 28mm
- Screen size: 27mm x 17mm
- Input Voltage: 3.7V
Installation instructions:- The circuit board is connected to the negative battery B-, B is positive
- Check polarity, wrong wiring will burn the board.
- the battery is connected in parallel welding.
- There is insulation between the battery and the circuit board
- The battery can not touch the circuit board, may cause short circuit if it does.
- Add to cartBuy now
Features :
- High reliability, low cost and compact size.
- LED Flash for low charge warning.
- Memory option to recall quantity of electricity.
- Specifically designed to monitor the power level of battery while charging or discharging.
- Provides instant battery status to permit effective management of the charging.
- Display of 4 segment LED bar graph.
- Easy to install and operate.
- Easy to install and operate.
18650 Battery Holder for 1 Battery
₹17.35 + GSTAdd to cartBuy nowApplication of 18650 Holder
- You can use this case with your own battery to form power system supply.
- Case for rechargeable battery.
- Simple DIY recharge power supply
3S 25A Lithium Ion BMS ? For 11.1V Battery
₹130.38 + GSTAdd to cartBuy nowSpecifications
- Charging Voltage: 12.6V DC CC/CV
- Balance Voltage for Single Cell: 4.2V
- Max Continuous Charge/Discharge Current: 25A
- Overcharge Detection Voltage: 4.25V
- Overcharge Release Voltage: 4.15V
- Over Discharge Detection Voltage: 2.3V
- Over Discharge Release Voltage: 3.0V
- OverCurrent Detection Current: 35 A
- External Short Circuit Detection
- Automatic Recovery on release of fault condition