6A 250V SPDT ON-OFF Rocker Switch with Light
₹27.09 + GST
- The 6A 250V SPDT ON-OFF Rocker Switch with Light is the simplest and easiest power control switch for your project. It comes with tabs on the top and bottom which secure it onto an enclosure without the need for any screws. On and Off positions are clearly marked which help users identify the current switch position during usage. The switch has a Tinbuilt indicator light to show the On/Off Status of Button.
- This switch is great to turn on/off and control DC Motors in Robotics, Car and Motorcycle DC Motors, DC Motors in Industrial Machines, Water Dispensers, etc. We have sourced the best switch with a high load rating of 16A at 250VAC which should be suitable for most applications.
- Switching Mode: ON-OFF
- Structure: SPDT
Features:
- Positions Marked on the rocker: I, O for easy identification
- Long Switching Life: 50000-100000? cycles
- Easy installation, No Screws or Nuts required
- Used widely for on/off power control, car, motorcycle, boat, some machines, water dispenser, etc.
41 in stock
specification
- Rating?? -? ? ? ? ? ? ? ? ? ? ?? ? ????? Max 6A at 250VAC
- Switching Mode? – ? ? ? ? ? ? ? ? ? ?? ?? ON-OFF
- Structure – ???????? ? ? ? ? ? ? ? ? ? ? ? ? ??? ?? SPDT
- Panel Cut-Out – ? ? ? ? ? ? ? ? ? ?? ??? 28 x 10 mm
- Material? – ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? Plastic and Metal
- Colour? – ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? Black-Red
- Length(mm) – ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? 30
- Width (mm)?? – ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ?? ? 12
- Height (mm)?? – ? ? ? ?? ? ? ? ? ? ? ? ? ?? ? ? 18
- Weight (gm) ? -? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 10
- Shipment Weight? ? -? ? ? ? ? ? ? ? ?? ? 0.02 kg
- Shipment Dimensions -? ? ? ? ? ? 4 ? 2 ? 2 cm
12 reviews for 6A 250V SPDT ON-OFF Rocker Switch with Light
You must be logged in to post a review.
Related products
DHT11 Module Temperature and Humidity sensor Module for boards compatible with Arduino, ARM and other MCU
₹65.00 + GSTAdd to cartThe DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
- Add to cart
Specification
- Size : 75mm (length) x 55mm (W) x 19.3mm (height);
- Weight : 80g;
- PCB Color : Blue;
- board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed;
- Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal;
- optocoupler isolation, good anti-jamming;
- Low pull, high release. Energisation status indicator light, release status LED is off;
- VCC for the system power, JD_VCC for the relay power. Default hair 12V relay, plug the jumper cap to;
- Relay Maximum output : DC 30V/10A, AC 250V/10A
- Wiring : VCC : positive power supply system GND : System power supply negative IN1 ? IN4 : relay control ports
Original Flex sensor 2.2 inches for Motion and Diy
₹276.73 + GSTAdd to cartFlex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. ?Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055.
BC327 PNP General Purpose Amplifier Transistor
₹1.95 + GSTAdd to cartBC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
- Add to cart
This is a?100 x 2.5 mm Nylon cable tie?also known as hose tie or Zip tie. The?cable tie?is perfect for holding items together specially electric cables or wires.? The flexible design of the?cable tie?makes it easier to slip the ties under and around wire harness. Thanks to the teeth on one of the side of the belt makes it easier for self locking and securing the wires.
Sneha (verified owner) –
Drone parts i ordered and found ok
Vivek (verified owner) –
Online best cost electronic components
Ayush (verified owner) –
The product is firmly packed.
Priya (verified owner) –
Drone parts i ordered and found ok
Prakash (verified owner) –
I got my project done with these components Great Support
Jayen (verified owner) –
Best cost electronic components in India
Rohit (verified owner) –
Best cost electronic components in India
Ayush (verified owner) –
Online best cost electronic components
Er.Prashant (verified owner) –
I got my project done with these components Great Support
Ayush (verified owner) –
Very well worth the money.
Priya (verified owner) –
Good support and recommended
Rahul (verified owner) –
Very fast delivery.